KIKUSUI OSCILLOSCOPE (LEADER) LBO-522 (1984)

KIKUSUI OSCILLOSCOPE (LEADER) LBO-522 (1984)
  • Model: Leader LBO-522
  • Manufacturer: LEADER ELECTRONICS CORPORATION, Japan
  • Manufactured date: 1984

Specification

CRT Display

  • Type: 150mm rectangular, internal graticule scale, Aluminized Screen and a flat face with illumination lamps and percentage scale
  • Accelerating potential: 7kV/ 2kV regulated
  • Effective display area: 8 x 10 div (1 div = 10mm)
  • Beam Rotator: Adjustment on the front panel
  • Graticule Illumination: Continuously variable
  • Intensity Modulation: Blanked by TTL level signal

Vertical Amplifiers CH1 and CH2 Sensitivity

  • Sensitivity: 5 mVi/div. to 5V/div. (all bandwidth), 0.5 mV/div. to 2 mV/div.
  • (5 MHz: MAG x 10) with variable in 10 steps, 1-2-5 sequence, continuously variable between steps.
  • Calibration Accuracy ±3% (25%: MAG x 10)
  • Bandwidth (3 dB, 8 div.) 
      • DC coupled : DC to 20[35] MHz (DC to 5 MHz: MAG x 10)
      • AC coupled 10 Hz to 20 [35] MHz
  • Rise Time 17.5[10] ns (70 ns; MAG x 10)

Vertical Amplifiers CH1 and CH2 Sensitivity

  • Input Impedance: 1 MQ +t 1.5%, 30 pF within t 5 pF (Tolerance: within + 2 pF)
  • Input Coupling:  AC, GND, DC
  • Maximum Input:  600V (DC + ACp-p)
  • Display Modes: CH-1, CH-2, CHOP, ALT, ADD
  • Polarity Invert:  CH-2 INVERT
  • CH-1 Output: Approx. 0.1V/div. in to 502 (DC to 20[35) MHz,-3 dB)

Calibrator

  • Output Voltage: 0.5Vp-p +2%
  • Frequency:  Approx. 1 kHz, square wave

Power Requirements

  • Line Voltage: AC 100, 120, 200, 220, 240V 50/60 Hz
  • Power Consumption: 50W

Size and Weight 160(H)} x 290(W) x 375(D) mm, 8.5 kg

Description

The LBO-522 oscilloscopes are portable ones with the functions of 5mV/div.(20[35] MHz), 500 µV/div. (5MHz), maximum sweep ratio 40[20] ns/div. (MAG x 5(10)), equipped with a 6-inch rectangular [metal-back] CRT with high brightness, internal graticule, and vertical sensitivity magnifier. It has a wide range of applications in production and service areas for measurements and testing of TV sets, VTR, and computer peripheral equipment. The provided TV synchronization separator, variable hold off and V-AXIS magnifier functions are useful for those applications.